Microwave signal generator
Mar 11, 2023| A signal generator in the range from decimeter wave to millimeter wave. Signals are typically generated by ultra-high frequency transistors and reflective klystrons with distributed parameter resonators, but there is a trend towards being replaced by solid-state devices such as microwave transistors, field effect transistors, and Gunn diodes. Instruments typically rely on mechanically tuned cavities to change their frequency, each device can cover about one octave, and the signal power coupled from the cavity can generally reach over 10 milliwatts. A simple signal source requires only 1000 Hz square wave amplitude modulation, while a standard signal generator can adjust the output reference level to 1 milliwatt, and then read the decibel milliwatt value of the signal level from the subsequent attenuator; There must also be internal or external rectangular pulse amplitude modulation for testing receivers such as radars.
Frequency sweep and program controlled signal generator
The frequency sweep signal generator can generate a signal with a constant amplitude and a linear change in frequency within a limited range. Using low frequency scanning voltage or current to control oscillation loop components (such as varactors or magnetic core coils) in the high-frequency and VHF bands to achieve swept frequency oscillation; In the early stage of the microwave section, voltage tuning frequency sweeping was used to change the oscillation frequency by changing the DC voltage of the spiral electrode of the backward-wave tube. Later, magnetic tuning frequency sweeping was widely used, using YIG ferrite balls as the tuning circuit of the microwave solid oscillator, and using the scanning current to control the DC magnetic field to change the resonance frequency of the balls. The frequency sweep signal generator has automatic frequency sweep, manual control, program control, and remote control modes of operation.

