MS9740A Anritsu Optical Spectrum Analyzer, 600nm - 1750nm

Overview and Features

The Anritsu MS9740A is an Optical Spectrum Analyzer "all-in-one unit" that has the performance and functions for evaluating all active optical devices, including SFP, XFP, and
SFP+ modules, as well as optical transceivers and VCSEL and DFB optical sources. Evaluation results, such as center wavelength, level, spectrum, SMSR, OSNR, etc., are displayed
on one screen. Combination with a Bit Error Rate Tester (BERT) supports spectrum analysis of optical transceiver outputs and WDM signals.

The MS9740A Optical Spectrum Analyzer reduces the total time from waveform sweeping to data transfer to external control equipment and supports simple analysis procedures (up to 80% faaster than some competing models), offering excellent cost performance and better productivity.

Specifications for the Anrtisu MS9740A include:

Applicable optical fiber: 10 μm/125 μm SM fiber (ITU-T G.652), 50 μm/125 μm GI fiber

Optical connector: User replaceable: FC, SC, ST, DIN, LC

Wavelength measurement range: 600 nm to 1750 nm

Wavelength accuracy:

● ±20 pm (1520 nm to 1620 nm, Resolution: 0.03 to 0.2 nm) (specs shown with option 002 installed)

● ±100 pm (1520 nm to 1620 nm, Resolution: 0.5, 1.0 nm) (specs shown with option 002 installed)

● Setting resolution: 0.03, 0.05, 0.07, 0.1, 0.2, 0.5, 1.0 nm (RBW: 3 dB optical filter: transmission bandwidth)

● Maximum input power: +23 dBm (Optical ATT: On)

Dynamic range:

● High dynamic range: 60 dB (0.4 nm from peak wavelength)

● Normal dynamic range: 58 dB (0.4 nm from peak wavelength)

● [Resolution: 0.05 nm, 1550 nm, Optical ATT: Off, 20° to 30°C]

Sweep:

● Sweep width: 0.2 nm to 1200 nm, 0 nm

● Sweep speed: ≤0.2 sec. (Span 5 nm)

● [Resolution: 0.1 nm, VBW=10 kHz, Normal dynamic range, center 1550 nm, sweep start to stop, no optical input, sampling point: ≤501]

● Dimensions and Mass 426 (W) × 177 (H) × 350 (D) mm (excluding projections) ≤15.0 kg (without option)