FSP40 Rohde & Schwarz Spectrum Analyzer 9 KHz - 40 GHz
The N9322C Basic Spectrum Analyzer is a value-priced, channel power measurement spectrum analyzer with general-purpose functionality for the 9 kHz to 7 GHz frequency range.
- Product Introduction
Overview and Features
The Rohde & Schwarz FSP40 Spectrum Analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz, Inc. FSP40. The CRT displays received signal strength (y-axis) against frequency (x-axis).
Key specifications of the Rohde & Schwarz FSP40 Spectrum Analyzer include:
Frequency range 9 kHz to 3GHz, 7 GHz, 13 GHz, 30 GHz and 40 GHz
Resolution bandwidth 1 Hz to 10 MHz
Displayed average noise level -155 dBm (1 Hz)
Phase noise -113 dB (1 Hz) at 10 kHz
Additional filters:
Channel filters from 100 Hz to 5 MHz and RRC filters
FFT filters from 1Hz to 30 kHz
EMI bandwidths and quasi-peak detector
Measurement functions for TOI, MC ACP(R), OBW, CCDF, APD, etc
Measurement applications for cellular standards and general purpose, e.g. phase noise, noise figure, etc.
Features of the R&S FSP40 Spectrum Analyzer include:
Full choice of detectors
Max, Min-, Auto-Peak, Sample, RMS, Average, Quasi-Peak
CP/ACP/Fast ACP measurement functions with a host of predefined standards
Multi Carrier ACP measurement with independent inter carrier spacing support
ACP/MCAP with up to 12 adjacent channels and max hold power function
Automatic test routines for measuring TOI, OBW, phase noise, and ACP®, AM modulation depth
Harmonic distortion measurement
CCDF & APD function (y-unit % possible)
Editable limit lines including PASS/FAIL indication
RBW-characteristics:
Digital filters from 10 Hz to 100 kHz (1,3,10 steps)
Analog filters from 300 kHz to 10 MHz (1,3,10 steps)
39 channel filters 100 Hz to 5 MHz
RRC filters (IS-136, TETRA, WCDMA)
EMI bandwidth standard
FFT filters 1 Hz to 30 kHz
10 dB step attenuator (5 dB with FSP-B25)
Electronic attenuator and preamplifier option
IF power trigger with sensitivity down to – 50 dBm mixer level
Gated trigger function
Full choice of marker functionality
Phase noise, noise, n dB down / n dB up , Peak list, frequency counter (0.1 Hz in 30ms)
Internal tracking generator with power sweep support
External generator control (reverse sweep)
Extension of frequency range with external mixers with BIAS tuning support whilst trace display is active
HP 859x/8566/8591E/71100C/71200C/71209C compatible GPIB command set
FSEx/FSIQ compatible GPIB command set
List mode for extremely fast GPIB operation
Ethernet interface (100 Base T)
21 cm color SVGA TFT Display
Split screen mode
Operating system: Embedded Windows XP
Easy documentation of measurements
Remote desktop functionality
Compatibility (printer drivers, network, etc.)
Interfaces: GPIB, RS-232-C, LAN (option), USB
VXI-11 remote support
Wide range of available application firmware including code domain power measurements for 3 GPP communication standards
Bluetooth
GSM/EDGE
3 GPP WCDMA, HSDPA, TD-SCDMA
CDMA2000, 1xEV-DV, 1xEV-DO
WLAN 802.11a (restricted OFDM spectrum)
Noise figure and gain measurements
FM/PM/AM measurement demodulator
Phase noise measurement
Power sensor measurement supporting the power sensors R&S NRP-Z11, Z21, Z22, Z23, Z24, Z51, Z55, Z81, Z91, the external power meters R&S NRVD, HP EPM, HP 437B, HP438A and power splitter
